Introducing Our New 2011 Products!

Introducing Our New 2011 Products!

NEW V130-33-TR20 replacing V130-33-R2

NEW V130-33-TR6 replacing V130-33-R6

NEW V200-18-E62B

NEW IO-AI8

NEW EX-A2X replacing EX-A1

NEW V130-33-TR20 replacing V130-33-R2

With the addition of 2, faster than ever high-speed PTO outputs, these enhanced units will be REPLACING the V130-33-R2 and V130-33-R6 units and still remain the SAME LOW COST!

V130-33-TR20 V130-33-R2(To be discontinued)
Inputs
Digital pnp/npn 12 12
HSC/Shaft –Encoder/Max. Freq. Measure 3 x 200kHz32-bit 3 x 30kHz32-bit
Analogue 2 x 10-bit, 0-10V,0-20mA, 4-20mA 2 x 10-bit, 0-10V,0-20mA, 4-20mA
Outputs
Digital 6 x Relay 6 x Relay
High-SpeedOutputs/PWM 2 x npn (2PTO)200kHz max None

More functionality for the same price

NEW V130-33-TR6 replacing V130-33-R6

With the addition of 2, faster than ever high-speed PTO outputs, these enhanced units will be REPLACING the V130-33-R2 and V130-33-R6 units and still remain the SAME LOW COST!


V130-33-TR6 V130-33-R6(To be discontinued)
Inputs
Digital pnp/npn 8 6
HSC/Shaft –Encoder/Max. Freq. Measure 2 x 200kHz32-bit 1 x 30khz32-bit
Analogue 6 x 10-bit, 2 x 0-10V,4 x 0-20mA, 4-20mA 6 x 10-bit, 2 x 0-10V,4 x 0-20mA, 4-20mA
Outputs
Digital 6 x Relay 6 x Relay
High-SpeedOutputs/PWM 2 x npn (2PTO)200kHz max None
More functionality for the same price!

The Advantage is clear:

At the SAME LOW COST as the previous R2 and R6 models, these new, High-speed “TR” models can handle inputs up to 200 kHz while high-speed outputs are able to support 5Hz to 200 kHz. In addition to all the core features of the previous R2 and R6 models, these new “TR” models enable the user to implement up to 2 independent Pulse Train Output instruction sets at one time for accurate Step-motor control. Providing flexibility when configuring a system’s precise requirements, these new High-speed I/Os offer particular benefits to the motion industry, or wherever speed control is required.

NEW V200-18-E62B

More I/O than Ever!

This new snap-in I/O module is equipped with 62 I/Os!

V200-18-E62B
Digital Inputs(isolated) 30 npn/pnp (including2 shaft-encoder inputs)
Analogue Inputs 2  x 10-bit0-10V, 0-20mA

4-20mA

Digital Outputs

(isolated)

28 x pnp2 x npn/pnp

High-Speed

What Are the Advantages of More I/O?

Specifically, the E62B snap-in module can be promoted where budget is a primary factor. Being equipped with more I/O allows this snap-in module to help cut costs by taking the place of expansion modules and adapters that may have otherwise been purchased.

NEW IO-AI8

IO- AI8 IO-ATC8
8 Analogue Inputs 8 Thermocouple/ Analogue Inputs
0-10V, 0-20mA 14-bit T/C J,K, T, B, E, N, R, S, 0.1˚ Resolution,0-10V, 0-20mA, 4-20mA, 12/14-bit
A low cost alternative!

The EX-A1

local I/O expansion adapter has also been upgraded and will soon be replaced with the NEW EX-A2X

local I/O expansion adapter with an isolated communication port.

For the SAME LOW COST, now with a cable length of up to 20 meters (versus

A 1 meter cable with the EX-A1) the EX-A2X is able to significantly reduce electrical noise in the field.

EX-A2X EX-A1(To be discontinued)
Local I/O module adapter Local I/O module adapter
Galvanic isolation 20 meters max 1 meter max
Up to 8 modules may be connected to a single PLC Up to 8 modules may be connected to a single PLC
Supports both 12/24 VDC Supports both 12/24 VDC
Same price greater functionality

Remember:

• The compatible cables for this unit are the “XL” type (EXL-CABXXX).

• *Note: The “EX1-CAXXX” cables cannot be used with the new model!

• The “EX XL” modules with the built in expansion port also use this updated isolated port and “XL” cables. (EX-D16A3-RO8 and EX-D16A3-TO16)