Run two Visilogics sessions at the same time!

Visilogics is the free of charge programming software for Unitronics Vision series of OPLC’s.  It is possible to run two sessions of Visilogics at the same time on the same PC by just copying and pasting a few folders.  This procedure has been tested on W7 and W8 but as these instances are fully independent please remember that if you upgrade one instance then you should also upgrade the second instance.

This procedure is useful if you want to work on two different programs at any one time.  It should not be used to maintain previous versions of Visilogics software as a separate utility program called the Visilogics Version Swapper is available, free of charge, to keep track of this for you.  The version swapper allows you to hold multiple versions of Visilogics on your PC and then swap between previous versions of the programming software in order to maintain legacy programs.

Download the pdf from here i4 Application Note Page

Analogue Inputs and Numbers, what does it all mean?

If you have a 12 bit analogue input it is scaled for 0-10Volts which will be equal to 0-4095.

Analogue Control

The 4095 comes from all 10 registers being full. i.e. the sum of all the registers being full and is display as 1 1 1 1 1 1 1 1 1 1 1 1 (binary) and is equal to 2048+1024+512+256+128+64+32+16+8+4+2+1=4095 (in decimal).

Voltage or Current?

If you want more information come on one of our training course.

Quick guide as to which product has what analogue resolution. It’s only a guide so if you have a question please contact us.

Part Number Description Analogue Inputs Analogue Outputs
JZ10-11-R16 24VDC, 6 Digital inputs, 2 Digital/Analogue inputs (0-10V), 2 Analogue inputs (0-20mA), 6 Relay outputs 10 bit
JZ10-11-R31 24VDC, 16 digital inputs, 2 digital/analogue inputs, 2 analogue inputs, 11 relay outputs 10 bit
JZ10-11-T10 24VDC, 6 Digital inputs, 4 Transistor outputs
JZ10-11-T17 24VDC, 6 Digital inputs, 2 Digital/Analogue inputs, (0-10V), 2 Analogue inputs (0-20mA), 7 Transistor outputs 10 bit
JZ10-11-T40 24VDC, 16 digital inputs, 2 digital/ analogue inputs, 2 analogue inputs, 20 transistor outputs 10 bit
JZ10-11-UN20 24VDC, 9 digital inputs, 2 digital/analogue inputs, 1 analogue input, 1 Thermocouple/PT100 input, 5 relay outputs, 1 transistor output 10 bit
JZ10-11-UA24 24VDC, 9 digital inputs, 2 digital/analogue inputs, 2 analogue inputs, 2 Thermocouple/PT100 inputs, 5 relay outputs, 2 transistor output, 2 analogue outputs 10 bit
JZ10-11-PT15 24VDC, 3 digital inputs, 3 digital/analogue inputs, 3 PT1000/NI1000, 5 relay outputs, 1 transistor output 10 bit 12 bit
V120-22-R1 12/24VDC, 10 Digital Inputs, 6 Relay Outputs, 1 Analogue Inputs, RS232/485 x 2 10 bit
V120-22-R2C 12/24VDC, 10 Digital Inputs, 6 Relay Outputs, 2 Analogue Inputs, RS232/485, CANbus x 2 10 bit
V120-22-R6C 24VDC, 6 Digital Inputs, 6 Relay Outputs, 6 Analogue Inputs, RS232/485, CANbus x 2 10 bit
V120-22-R34 24VDC, 20 Digital Inputs, 2 Analogue/Digital Inputs, 12 Relay Outputs, RS232/485 x 2 10 bit
V120-22-T2C 12/24VDC, 10 Digital Inputs, 12 Transistor Outputs, 2 Digital/Analogue Inputs, RS232/485 x 2 10 bit
V120-22-UN2 12/24VDC, 10 Digital Inputs, 12 Transistor Outputs, 2 PT100/TC/Analogue/Digital Inputs, RS232/485 x 2 14 bit
V120-22-UA2 24VDC, 10 Digital Inputs, 10 Transistor Outputs, 2 TC/Analogue/Digital Inputs, 2 Analogue Outputs, RS232/485 x 2 14 bit 12 bit
V120-22-RA22 24VDC, 12 Digital Inputs including 2 Analogue inputs and 2 temperature measurement inputs, high speed counter/ shaft encoder input, 8 relay outputs, 2 Analogue outputs, RS232/ RS485 x 2 14 bit 12 bit
V130-33-TR20 PLC/Graphic HMI, 24VDC, 12 Digital Inputs, configurable via wiring to include 2 Analog, and 3 HSC/Shaft-encoder Inputs, 6 Relay Outputs, 2 high-speed npn Transistor Outputs 10 bit
V130-33-TR6 PLC/Graphic HMI, 24VDC, 8 Digital (configurable via wiring to include 2 Analogue (current/voltage) and 1 HSC/Shaft-encoder), 4 Analogue Inputs (current), 6 Relay Outputs, 2 high-speed npn Transistor Outputs 10 bit
V130-33-R34 PLC/Graphic HMI, 24VDC, 20 Digital Inputs, 2 Analogue/Digital Inputs, 12 Relay Outputs, RS232/485 10 bit
V130-33-TR34 PLC/Graphic HMI, 24VDC, 17 Digital inputs, 3 HSC with up to 200kHz ,2 Analog/Digital inputs, 8 Relay outputs, 4 npn- HSO- 5Hz-200kHz (3PTO),RS232/RS485 14 bit
V130-33-RA22 PLC/Graphic HMI, 24VDC, 8 Digital Inputs, 2 Analogue/Digital Inputs, 2 TC/PT/Digital Inputs, 8 Relay Outputs, 2 Analogue Outputs, RS232/485 10 bit
V130-33-TRA22 PLC/Graphic HMI, 24VDC, 5 Digital inputs, 1 Digital/ HSC, 2 Analog/ Digital inputs, 2PT100/ Thermocouple or 4 Digital inputs, 4 Relay outputs, 4 npn-HSO- 5Hz-200kHz ( 2 PTO),2 Analog outputs, RS232/RS485 Step-motor control 12/14 bit 12 bit
V130-33-T2 PLC/Graphic HMI, 24VDC, 10 Digital Inputs, 2 Analogue/Digital Inputs, 12 Transistor Outputs, RS232/485 10 bit
V130-33-T38 PLC/Graphic HMI, 24VDC, 20 Digital Inputs, 2 Analogue/Digital Inputs, 16 Transistor Outputs, RS232/485 10 bit
V130-33-TA24 PLC/Graphic HMI, 24VDC, 8 Digital Inputs, 2 Analogue/Digital Inputs, 2 TC/PT/Digital Inputs, 10 Transistor Outputs, 2 Analogue Outputs, RS232/485 14 bit 12 bit
V350-35-TR20 3.5″ Colour Touchscreen, 24VDC, 10 Digital Inputs, 2 Analogue/Digital Inputs, 3 HSC, 6 Relay Outputs, 2 PWM, RS232/RS485 10 bit
V350-35-TR6 8 Digital ( configurable via wiring to include 2 Analogue (current/voltage) and 1 HSC/Shaft-encoder), 4 Analogue Inputs (current), 6 Relay Outputs, 2 high-speed npn Transistor Outputs 10 bit
V350-35-R34 3.5″ Colour Touchscreen, 24VDC, 20 Digital Inputs, 2 Analogue/Digital Inputs, 12 Relay Outputs, RS232/RS485 10 bit
V350-35-TR34 3.5″ Colour Touchscreen, 24VDC, 22 Digital Inputs, (2 Analogue/Digital Inputs), (3HSC/Shaft-encoder), 8 Relay Outputs, 4 HS npn Transistor Outputs, RS232/RS485 10 bit
V350-35-RA22 3.5″ Colour Touchscreen, 24VDC, 8 Digital Inputs, 2 Analogue/Digital Inputs, 2 TC/PT/Digital Inputs, 8 Relay Outputs, 2 Analogue Outputs, RS232/RS485 14 bit 12 bit
V350-35-TRA22 3.5″ Colour Touchscreen, 24VDC, 5 Digital inputs, 1 Digital/ HSC, 2 Analog/ Digital inputs, 2PT100/ Thermocouple or 4 Digital inputs, 4 Relay outputs, 4 npn-HSO- 5Hz-200kHz ( 2 PTO), 2 Analog outputs, RS232/RS485. 12/14 bit 12 bit
V350-35-T2 3.5″ Colour Touchscreen, 24VDC, 10 Digital Inputs, 2 Analogue/Digital Inputs, 12 Transistor Outputs, RS232/RS485 10 bit
V350-35-T38 3.5″ Colour Touchscreen, 24VDC, 20 Digital Inputs, 2 Analogue/Digital Inputs, 16 Transistor Outputs, RS232/RS485 10 bit
V350-35-TA24 3.5″ Colour Touchscreen, 24VDC, 8 Digital Inputs, 2 Analogue/Digital Inputs, 2 TC/PT/Digital Inputs, 10 Transistor Outputs, 2 Analogue Outputs, RS232/RS485 14 bit 12 bit
V350-35-B1 3.5″ Colour Touchscreen, 24VDC, no on-board I/Os, can be connected to expansion modules, RS232/RS485 10 bit
V200-18-E1B 16 Digital Inputs, 10 Relay Outputs, 4 Transistor Outputs, 3 Analogue Inputs 10 bit
V200-18-E2B 16 Digital Inputs, 10 Relay Outputs, 4 Transistor Outputs, 2 Analogue Inputs, 2 Analogue Outputs 10 bit 12 bit
V200-18-E3XB 18 Digital Inputs, 15 Relay Outputs, 2 Transistor Outputs, 4 Isolated Analogue/ Thermocouple/ PT100 Inputs, 4 Analogue Outputs 12/14 bit 12 bit
V200-18-E4XB 18 Isolated Digital Inputs, 17 Transistor Outputs, 4 Isolated Analogue/ Thermocouple/ PT100 Inputs, 4 Isolated Analogue Outputs 12/14 bit 12 bit
V200-18-E5B 18 Digital Inputs, 17 Transistor Outputs,  3 Analogue Inputs
V200-18-E6B 18 Digital Inputs, 15 Relay Outputs, 2 Transistor Outputs, 3 Analogue Inputs, 2 Analogue/ Thermocouple/ PT100 Inputs, 2 Analogue Outputs 10/14 bit 12 bit
V200-18-E8B 30 Digital Inputs, 28 Transistor Outputs (PNP), 2 Transistor Outputs (PNP/NPN)
V200-18-E46B 18 Digital (including 2 shaft encoders), 9 Analogue Inputs, 15 Relay, 2 pnp/npn HSO, 2 Analogue Outputs 10/14 bit 12 bit
V200-18-E62B 30 Digital (including 2 shaft encoders), 2 Analogue Inputs, 28 pnp, 2 pnp/npn HSO, 2 Analogue Outputs 10 bit
IO-AI4-AO2 4 Analogue Inputs / 2 Analogue Outputs 12 bit 12 bit
IO-AO6X 6 Isolated Analogue Outputs 12 bit
IO-PT400 4 PT100 / NI100 / NI120 Inputs 12 bit
IO-PT4K 4 PT1000 / NI1000 Inputs 12 bit
IO-ATC8 8 Thermocouple/Analogue Inputs 12/14 bit
IO-AI8 8 Analogue Inputs 14 bit (NO TC’s) 12/14 bit
IO-D16A3-RO16 16 Digital Inputs / 3 Analogue Inputs / 16 Relay Outputs, 24VDC 10 bit
IO-D16A3-TO16 16 Digital Inputs / 3 Analogue Inputs / 16 Transistor Outputs, 24VDC 10 bit
EX-D16A3-RO8 16 Digital Inputs / 3 Analogue Inputs / 8 Relay Outputs, includes IO adapter, 24VDC & 1 meter Cable 10 bit
EX-D16A3-TO16 16 Digital Inputs / 3 Analogue Inputs / 16 Transistor Outputs, includes IO adapter, 24VDC & 1 meter Cable 10 bit

Programming Unitronics OPLC via USB ports.

The following products come with USB programming ports and USB programming cables

V1040-T20B ~ 10.4” Colour touch screen, TFT,  800 x 600 Resolution (SVGA), 65k Colours, White LED-illuminated backlight, USB programming port, 9 Programmable function keys, Up to 1024 I/Os, CANbus Port, 3 x RS232/485

V1040-T20B-N ~ 10.4” Colour touch screen, TFT,  800 x 600 Resolution (SVGA), 65k Colours, White LED-illuminated backlight, USB programming port, 9 Programmable function keys, Up to 1024 I/Os, CANbus Port, 3 x RS232/485 OEM product no branding

V1210-T20BJ ~ 12.1” Colour touch screen TFT, IP66,  800 x 600 Resolution (SVGA), 65k Colours, White LED-illuminated backlight, USB programming port,Up to 1024 I/Os,CANbus Port, 3 x RS232/485

V1210-T20BJ-N ~ 12.1” Colour touch screen TFT, IP66,  800 x 600 Resolution (SVGA), 65k Colours, White LED-illuminated backlight, USB programming port, Up to 1024 I/Os,, CANbus Port, 3 x RS232/485, OEM product no branding

You can download the driver from the Unitronics website. http://www.unitronics.com/Data/Uploads/communication/CP210x_VCP_Win_XP_S2K3_Vista_7.zip

These products are coming into stock with USB ports, so if you want USB programming just ask.

V560-60-T25B ~ 5.7″ Colour Touchscreen, Alpha-Numeric Keypad, QVGA 16 Bit Colour supports 65k colours, CANbus port, 2 RS232/486

V570-57-C30B ~ 5.7″ Colour Touchscreen, CSTN (320X240), CANbus port, 2 RS232/485

V570-57-T20B ~ 5.7″ Colour Touchscreen, TFT (320X240), with silver bezel, CANbus port, 2 x RS232/484, SD Card

V570-57-T20B-N ~5.7″ Colour Touchscreen, TFT (320X240), CANbus port, 2 x RS232/484, with silver bezel, SD Card, No Branding, OEM Product

V570-57-T20B-JN  ~ 5.7″ Colour Touchscreen, TFT (320X240), CANbus port, 2 x RS232/484, SD Card, IP66 Plan black front, No Branding, OEM Product

V570-57-T20B-J ~ 5.7″ Colour Touchscreen, TFT (320X240), CANbus port, 2 x RS232/484, SD Card, IP66 plain black front.

The other products can be programmed via a USB to serial converter, you can buy this on line, we keep them in stock and delivery is normally 2 -3 days maximum. Shipped via FedEx.

Unitronics USB programming the easy way
Use a USB converter that works, tried and tested and we support you the customer. UK stock buy on line

http://www.i4automation.co.uk/usbrs232.aspx

 

 

 

 

 

Learn from your desk ~ Getting started with Vision OPLCs and product overview

Join us for a Webinar on January 23
Unitronics Logo
Space is limited.
Reserve your Webinar seat now contact us today.

In this webinar will showcase the different features in benefits offered in our Vision line of PLC+HMIs and show you how to get started with your first project.
Title:    Getting started with Vision OPLCs and product overview
Date:    Wednesday, January 23, 2013
Time:    05:00 PM – 6:00 PM GMT
After registering you will receive a confirmation email containing information about joining the Webinar.
System Requirements
PC-based attendees
Required: Windows® 7, Vista, XP or 2003 Server

Mac®-based attendees
Required: Mac OS® X 10.5 or newer

Mobile attendees
Required: iPhone®, iPad®, Android™ phone or Android tablet