New UMT30 Ultrasonic sensor with built in display

Built in display allows for quick and easy set up. With the choice of 10+ configuration options we are bound to have the cost effective solution you are looking for.

Ultrasonic sensor with display from Sensopart and i4 Automation
Ultrasonic sensor with display from Sensopart and i4 Automation

 

Output Part No. List Price Summer 2011 Description
1 x Analog UMT 30-350-A-IUD-L5 £329.00 Ultrasonic sensor M30, scanning distance 350 mm, 1 analogue output (4-20mA / 0-10V) with auto-switching, 2 buttons, 7-segment display, synch/multiplex input, useful additional functions, plug M12, 5-pin
1 x PNP UMT 30-350-PSD-L5 £199.00 Ultrasonic sensor M30, scanning distance 350 mm, 1 PNP, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12, 5-pin
2 x PNP UMT 30-350-2PSD-L5 £259.00 Ultrasonic sensor M30, scanning distance 350 mm, 2 PNP, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12, 5-pin
1 x Analog UMT 30-1300-A-IUD-L5 £329.00 Ultrasonic sensor M30, scanning distance 1300 mm, 1 analogue output (4-20mA / 0-10V) with auto-switching, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12, 5-pin
1 x PNP UMT 30-1300-PSD-L5 £199.00 Ultrasonic sensor M30, scanning distance 1300 mm, 1 PNP, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12, 5-pin
2 x PNP UMT 30-1300-2PSD-L5 £259.00 Ultrasonic sensor M30, scanning distance 1300 mm, 2 PNP, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12 , 5-pin
1 x Analog UMT 30-3400-A-IUD-L5 £349.00 Ultrasonic sensor M30, scanning distance 3400, 1 analogue output (4-20 mA/ 0-10 V) with auto-switching, 2 buttons, 7-segment display, synch/multiplex input, useful additional functions, plug M12, 5-pin
1 x Analog (Edelst.) UMT 30-3400-AE-IUD-L5 £373.00 Ultrasonic sensor M30 stainless steel, scanning distance 3400, 1 analogue output (4-20 mA/ 0-10 V) with auto-switching, 2 buttons, 7-segment display, synch/multiplex input, useful additional functions, plug M12, 5-pin
1 x PNP UMT 30-3400-PSD-L5 £249.00 Ultrasonic sensor M30, scanning distance 3400 mm, 1 PNP, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12, 5-pin
2 x PNP UMT 30-3400-2PSD-L5 £289.00 Ultrasonic sensor M30, scanning distance 3400 mm, 2 PNP, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12, 5-pin
1 x Analog UMT 30-6000-A-IUD-L5 £373.00 Ultrasonic sensor M30, scanning distance 6000 mm, 1 analogue output (4-20mA / 0-10V) with auto-switching, 2 buttons, 7-segment display, synch/multiplex input, useful additional functions, plug M12, 5-pin
1 x PNP UMT 30-6000-PSD-L5 £249.00 Ultrasonic sensor M30, scanning distance 6000 mm, 1 PNP, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12, 5-pin
2 x PNP UMT 30-6000-2PSD-L5 £329.00 Ultrasonic sensor M30, scanning distance 6000 mm, 2 PNP, 2 buttons, 7-segment display, proximity or reflex mode, synch/multiplex input, useful additional functions, plug M12, 5-pin

Unitronics Snap-In I/O Offers More Flexibility for Vision Series Integrated PLC+HMIs.

The convenience is clear: Unitronics PLC + HMI package exempts machine manufacturers from setting up Panel-PLC communication- saving programming time, cabinet space and money. This single Ladder Logic programming environment is part of the Unitronics “all-in-one package”, and is available at no additional cost.

V200-18-E62B with V1210-T20B from i4 Automation
PLC & HMI with easy to use snap in module

Unitronics Snap-in I/Os are a convenient, affordable way to “snap” your choice of a variety of I/O combinations directly to the back of most “Vision” series PLC + HMI controllers. Most “Vision” series controllers enable the user to pick and choose from an assortment of Snap-in I/O combinations to fit their specific application needs. A whole system’s requirements can be fulfilled with just one “Snap”! Connecting directly to the back of a Unitronics Vision200, Vision500, Vision1040 or Vision1210 series PLC+HMI, the new V200-18-E62B Snap-in module now supports a total combination of 62 analog and digital inputs and outputs. Specifically, this combination includes: 30 Digital inputs (including 2 shaft encoder inputs), 2 analog inputs, 28 digital outputs, and 2 high-speed digital outputs.

With additional expansion modules, mounted locally or remotely up to 1000m from the controller, configurations can be expandable up to 1024 I/O. Unitronics solitary Snap-in I/Os (without expansion units) typically range from 30 – (now) 62 I/O with the new V200-18-E62B. Basic Snap I/O options can include: digital and analog inputs and outputs, high-speed I/O, PT100/Thermocouple capabilities, and weight measurement.

Additional features of the “Enhanced Vision” series controllers (V1210, V1040, V570, V350, V560, V290 Color, and V130) include: A USB programming port, recipe capabilities, Micro SD card memory storage for data logging and back up, complete PLC cloning and more. Communication options include Ethernet, cellular, and industrial protocols such as MODBUS, DF1 slave, J1939, and CANopen, UniCan.

 

High density I/O as part of the PLC & HMI system

Now able to provide even more flexibility when configuring a system’s precise requirements, the new Snap-in module offers particular appeal wherever budget is a primary factor. Being equipped with many I/Os allows this snap-in module to help cut costs by taking the place of lower I/O count modules and adapters that may have otherwise been purchased.

Unitronics PLC & HMI all in One Unit: Now PROFIBUS option

Unitronics, a global developer and manufacturer of Programmable Logic Controllers with integrated HMIs, now supports fast, deterministic data exchange on the factory floor with NEW PROFIBUS communication capabilities.

 

Unitronics slave mdules on a network
Unitronics now have Profibus option contact i4 Automation

Unitronics new communication module, the V100-17-PB1, is now available for the Vision350™ and Vision130™ series all-in-one controllers. Via an easy to use function block, the enhanced controllers installed with the new communication card can function in a PROFIBUS DP network as slave devices via GSD files. This enables the Unitronics controllers to be integrated into applications that have a PROFIBUS network, under PROFIBUS master devices.

 

Why use Unitronics PROFIBUS? Not only do these enhanced models give users with PROFIBUS networks the compatibility advantage, but all Unitronics controllers contain a built-in, user-friendly operator panel and a wide variety of onboard and expandable input/output options. Unitronics integrated controllers now give engineers and systems integrators the benefit of distributed slave control in a pre-existing PROFIBUS network with a bare minimum of budget, programming time, cabinet space and wiring.

 

Both series of controllers support many types of analogue and digital I/O options, including high-speed I/O, PT100/Thermocouple capabilities, and weight measurement. These can be mounted locally or remotely, up to 1000m from the controller. The Vision350™ can support up to 512  I/Os via on board and expansion modules, while the Vision130™ model is expandable up to 256 I/O points. The Vision350™’s 3.5”, 65K colour touchscreen can show over 1000 displays, with 6MB for images and fonts, while the Vision130™ model features a graphical screen and keypad. Both units can also display graphs according to historical values- to reflect trends of recorded data. With the new addition of PROFIBUS, other communication options include TCP/IP Ethernet, GSM/SMS, MODBUS and CANopen networking plus remote access for data acquisition and program download. Other core capabilities include a rich range of embedded features such as 24 independent PID loops, internal 120K data table for datalogging and recipe programming, and SD card.

Bigger choice of screen size NEW 12.1″ screen!

Unitronics Uk from i4 Automation
i4 Automation Unitronics V1210

Unitronics New Vision1210 TM

PLC & 12.1” Colour HMI

As a global developer and manufacturer of Programmable Logic Controllers with on board HMIs, Unitronics is proud to introduce the newest big-screen member of their PLC+HMI  family- the Vision1210™. Industrial control processes can now enjoy full PLC functionality with a larger than ever 12.1”, 800×600 Resolution (SVGA), 65K color-touchscreen. The PLC + HMI advantage gives users the opportunity to operate on a minimum of budget, programming time and wiring.

This controller is a perfect fit for the food industry- with its IP66 rating, this unit is ideal wherever spray/wipe down applications apply. A wide variety of on board I/O options can be added by simply snapping a module onto the back of the PLC. Expandable up to 1024 I/O, these configurations include digital and analog inputs and outputs, high-speed I/O, PT100/Thermocouple capabilities, and weight measurement. They can be mounted locally or remotely, up to 1000m from the controller. This power-PLC is equipped with a built-in USB programming port, recipe capabilities, Micro SD card memory storage for data logging and back up, complete PLC cloning and more.

Systems integrators can now rely on a single device: the Vision1210™ can support 24 auto-tuned PID loops to control temperature, level, and pressure, while the 16-bit, 12.1” SVGA color touch screen displays data, color trend graphs, and attention-grabbing alarm screens. Display options are almost endless, with more than 1000 user-designed screens, and up to 500 images per application. Internal memory holds 2MB of application logic, plus 1MB for fonts and 32MB for images.

Communication options include TCP/IP Ethernet, cellular, and industrial protocols such as MODBUS, DF1 slave, J1939, CANopen and more. In addition, the Vision1210™ can be ‘taught’ to communicate via almost any device-based protocol. The controller is also capable of time based and immediate interrupts, making it a natural for ‘rapid response’ applications such as packaging machines.

Unitronics’ FREE VisiLogic software provides one user-friendly environment for hardware configuration, modular Ladder application development, and HMI design, including a rich color library of industrial images. Unitronics also offers FREE technical support for all of their products.

The Vision1210™ reduces overall system costs by minimizing hardware requirements, saving cabinet space—and, above all—exempting the user from setting up Panel-PLC communication.

For more information
http://www.i4automation.co.uk/v1210.aspx